https://enkoralighting.com/blog Specification-grade articles on LED strip lighting from ENKORA. en-us https://enkoralighting.com/blog/class-2-led-driver-explained https://enkoralighting.com/blog/class-2-led-driver-explained Mon, 12 Oct 2026 12:00:00 GMT Technical What a Class 2 LED driver is, why the 100 VA limit means about 80 W of strip per output, how to split long runs and when a Class 2 supply is the wrong choice. https://enkoralighting.com/blog/0-10v-led-strip-dimmer-wiring https://enkoralighting.com/blog/0-10v-led-strip-dimmer-wiring Mon, 12 Oct 2026 12:00:00 GMT Technical 0-10V LED strip dimming, step by step: line, switched hot, driver output and the purple and gray control pair, plus drivers per dimmer and 0-10V vs TRIAC. https://enkoralighting.com/blog/led-strip-dimmer-switch-triac-elv-0-10v-dali-dmx https://enkoralighting.com/blog/led-strip-dimmer-switch-triac-elv-0-10v-dali-dmx Mon, 12 Oct 2026 12:00:00 GMT Technical Which LED strip dimmer switch works? Match the dimmer to the driver: TRIAC, ELV, 0-10V, DALI, DMX or wireless, with wiring, minimum load and common mistakes. https://enkoralighting.com/blog/2700k-vs-3000k-vs-4000k-color-temperature-by-room https://enkoralighting.com/blog/2700k-vs-3000k-vs-4000k-color-temperature-by-room Mon, 12 Oct 2026 12:00:00 GMT Buying Guides 2700K vs 3000K vs 4000K: what each color temperature looks like and which to use in kitchens, bathrooms, bedrooms, offices and retail, with mistakes to avoid. https://enkoralighting.com/blog/cri-90-vs-95-high-cri-led-strip https://enkoralighting.com/blog/cri-90-vs-95-high-cri-led-strip Mon, 12 Oct 2026 12:00:00 GMT Buying Guides CRI 90 vs 95 for LED strip: what the numbers measure, why R9 matters, where 95+ pays off, where 90 is plenty and how to compare spec sheets before ordering. https://enkoralighting.com/blog/tunable-white-led-strip-wiring-controllers https://enkoralighting.com/blog/tunable-white-led-strip-wiring-controllers Mon, 12 Oct 2026 12:00:00 GMT Product Know-How Tunable white LED strip explained: three-wire wiring, CCT controllers, 0-10V, DALI DT8 and DMX, driver sizing with a worked example, and where it pays off. https://enkoralighting.com/blog/addressable-led-strip-spi-vs-dmx https://enkoralighting.com/blog/addressable-led-strip-spi-vs-dmx Mon, 12 Oct 2026 12:00:00 GMT Product Know-How Addressable LED strip types compared: how SPI and DMX/Art-Net pixel control work, how many pixels fit in a universe, and how to plan an architectural job. https://enkoralighting.com/blog/do-led-strip-lights-get-hot https://enkoralighting.com/blog/do-led-strip-lights-get-hot Mon, 12 Oct 2026 12:00:00 GMT Technical Do LED strip lights get hot? They run warm, not hot, but heat still decides lifespan and color. How channels, mounting and watts per foot change the result. https://enkoralighting.com/blog/led-strip-in-shower-niche https://enkoralighting.com/blog/led-strip-in-shower-niche Sat, 10 Oct 2026 12:00:00 GMT Applications LED strip in a shower niche, done right: top vs side placement, IP67 strip with sealed ends, Class 2 drivers outside the wet area, and the rough-in sequence. https://enkoralighting.com/blog/backlit-onyx-countertops-bars-walls https://enkoralighting.com/blog/backlit-onyx-countertops-bars-walls Sat, 10 Oct 2026 12:00:00 GMT Applications Backlit onyx without hot spots: which stones transmit light, LED sheets vs strip grids, cavity depth and spacing, color temperature, heat, access and drivers. https://enkoralighting.com/blog/toe-kick-led-strip-lighting https://enkoralighting.com/blog/toe-kick-led-strip-lighting Sat, 10 Oct 2026 12:00:00 GMT Applications Toe kick LED strip lighting done right: where to mount it, which channel to use, COB for glossy floors, motion sensors for night paths and driver sizing. https://enkoralighting.com/blog/recessed-led-channel-drywall-mud-in https://enkoralighting.com/blog/recessed-led-channel-drywall-mud-in Sat, 10 Oct 2026 12:00:00 GMT Buying Guides How to install a recessed LED channel in drywall: planning, blocking, taping and mudding mud-in profile flanges, choosing a diffuser and the trade sequence. https://enkoralighting.com/blog/led-strip-wire-gauge-chart-12v-24v https://enkoralighting.com/blog/led-strip-wire-gauge-chart-12v-24v Sat, 10 Oct 2026 12:00:00 GMT Technical LED strip wire gauge charts for 12V and 24V: maximum feed length for 18 to 10 AWG at common loads, the voltage drop formula and a worked example. https://enkoralighting.com/blog/led-strip-lumens-per-foot https://enkoralighting.com/blog/led-strip-lumens-per-foot Sat, 10 Oct 2026 12:00:00 GMT Technical LED strip lumens per foot by application: typical lm/ft for accent, shelving, under-cabinet, cove and wall wash, plus lm/m conversion and lm/W explained. https://enkoralighting.com/blog/led-strip-flickering-causes-and-fixes https://enkoralighting.com/blog/led-strip-flickering-causes-and-fixes Sat, 10 Oct 2026 12:00:00 GMT Technical LED strip flickering usually comes from a loose connection, an overloaded driver or a dimmer mismatch. A step-by-step guide to finding and fixing the cause. https://enkoralighting.com/blog/led-strip-not-working-after-cutting https://enkoralighting.com/blog/led-strip-not-working-after-cutting Sat, 10 Oct 2026 12:00:00 GMT Technical LED strip not working after cutting? Find the cause fast: a cut off the line, lifted pads, a bad connector, reversed polarity or data fed into the wrong end. https://enkoralighting.com/blog/what-is-an-led-how-light-emitting-diodes-work https://enkoralighting.com/blog/what-is-an-led-how-light-emitting-diodes-work Sat, 26 Sep 2026 12:00:00 GMT Buying Guides What is an LED? A plain-English guide to how light-emitting diodes work, where white light comes from, SMD vs COB, LED specs and lifespan. https://enkoralighting.com/blog/how-to-choose-led-strip-lights https://enkoralighting.com/blog/how-to-choose-led-strip-lights Sat, 26 Sep 2026 12:00:00 GMT Buying Guides How to choose LED strip lights in ten steps: IP rating, color temperature, CRI, lumens per foot, COB vs SMD, 12V vs 24V, run length, dimming and drivers. https://enkoralighting.com/blog/led-strip-voltage-drop-12v-vs-24v https://enkoralighting.com/blog/led-strip-voltage-drop-12v-vs-24v Sat, 26 Sep 2026 12:00:00 GMT Technical Why LED strips dim at the far end, how 12V and 24V compare, how to calculate voltage drop in the feed wire, and when to add a second feed or a long-run strip. https://enkoralighting.com/blog/under-cabinet-led-strip-lighting-guide https://enkoralighting.com/blog/under-cabinet-led-strip-lighting-guide Sat, 26 Sep 2026 12:00:00 GMT Applications How to plan under-cabinet LED strip lighting: where to mount it, which profile, the right CCT and CRI for kitchens, how bright it should be and how to power it. https://enkoralighting.com/blog/cove-lighting-with-led-strips https://enkoralighting.com/blog/cove-lighting-with-led-strips Sat, 26 Sep 2026 12:00:00 GMT Applications How to design LED cove lighting: cove depth and setback, avoiding hot spots, lumens per foot, the right color temperature, dimming, and COB vs SMD strip. https://enkoralighting.com/blog/led-lighting-for-pools-and-water-features https://enkoralighting.com/blog/led-lighting-for-pools-and-water-features Sat, 26 Sep 2026 12:00:00 GMT Applications Before you put LED strip lights in or around a pool, check this: IP67 vs IP68, underwater construction, chemical resistance, listings, power supplies and code. https://enkoralighting.com/blog/led-neon-flex-top-bend-vs-side-bend-vs-360 https://enkoralighting.com/blog/led-neon-flex-top-bend-vs-side-bend-vs-360 Sat, 26 Sep 2026 12:00:00 GMT Product Know-How LED neon flex explained: top bend vs side bend vs 360° round neon, how to choose size, output and color, and how to mount, cut, seal and power it. https://enkoralighting.com/blog/sauna-and-steam-room-led-lighting https://enkoralighting.com/blog/sauna-and-steam-room-led-lighting Sat, 26 Sep 2026 12:00:00 GMT Applications Sauna LED lighting that lasts: why ordinary strip fails in saunas and steam rooms, where to place it, what ratings to ask for, and where the driver goes. https://enkoralighting.com/blog/how-to-read-an-enkora-sku https://enkoralighting.com/blog/how-to-read-an-enkora-sku Sat, 26 Sep 2026 12:00:00 GMT Product Know-How Every ENKORA SKU follows one standard: series, LED type and density, power, voltage, color temperature, IP rating, width and length. Here's how to read it.